Where To Place Carbon Monoxide Detectors In Your Columbus Residence
Homeowners must protect against numerous risks like burglary, flooding, and fire. But what about a danger that can’t be detected by human senses? Carbon monoxide is different from other threats as you may never know it’s there. Nevertheless, implementing CO detectors can simply shield your family and property. Learn more about this potentially lethal gas and where to place carbon monoxide detectors in your Columbus residence.
What Is Carbon Monoxide?
Known as the silent killer due to its lack of odor, color, and taste, carbon monoxide is a common gas produced by an incomplete combustion of fuels. Any appliance that consumes fuels like a fireplace or furnace may create carbon monoxide. While you normally won’t have any trouble, issues can present when equipment is not routinely inspected or adequately vented. These missteps may result in a build-up of the potentially lethal gas in your home. Generators and heating appliances are commonly to blame for CO poisoning.
When exposed to lower amounts of CO, you could experience fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to high concentrations can result in cardiorespiratory failure, and even death.
Tips On Where To Place Columbus Carbon Monoxide Detectors
If your home is without a carbon monoxide detector, purchase one today. Ideally, you ought to use one on every floor of your home, including basements. Here are a few suggestions on where to place carbon monoxide detectors in Columbus:
- Put them on each level, specifically in places where you have fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
- You should always use one no more than 10 feet away from bedrooms. If you only install one CO detector, this is where it should go.
- Place them approximately 10 to 20 feet from potential CO producing appliances.
- Avoid placing them right above or beside fuel-consuming appliances, as a bit of carbon monoxide may be discharged when they start and set off a false alarm.
- Fasten them to walls about five feet off the ground so they may sample air where inhabitants are breathing it.
- Avoid installing them near windows or doors and in dead-air places.
- Put one in areas above garages.
Inspect your CO detectors routinely and maintain them per manufacturer recommendations. You will generally need to replace units in six years or less. You should also ensure any fuel-burning appliances are in in good working condition and have proper ventilation.